London:

Nationwide:

Floor Polishing Service
25,000+
Floors Restored
Residential Sanding Service
27 Years Experience
Floor Renovation Service
Wood Flooring Association Certified

DIY Guide to Refinishing Hardwood Floors | Mr Sander®

Posted on June 11, 2023

Blog

How to Refinish Hardwood Floors: A Comprehensive Guide

Hardwood floors offer timeless elegance and durability. But like all good things, they may show signs of wear over time. Fortunately, you can restore their former glory through refinishing, a process that involves sanding away the old finish and applying a new one. This blog post will provide a step-by-step guide on how to refinish your hardwood floors. Wood Floor Renovation

Understanding the Refinishing Process

Refinishing hardwood floors is an involved process that can dramatically transform the look of your space. It entails removing the old finish, sanding down the wood, and applying a new stain and finish. Refinishing not only revives your floors’ appearance but also addresses minor damages and discolorations.

Assessing your hardwood floors

Before beginning the refinishing process, it’s essential to assess your floor’s condition. Check for deep scratches, gouges, or warped boards that may require repair or replacement. If your floor has been sanded several times before, it might be too thin to sand again.

Gathering Your Tools

Refinishing hardwood floors requires some specific tools and materials. Here is a general list of what you will need:
  • Drum or orbital sander
  • Sandpaper of various grits
  • Wood filler
  • Stain (if desired)
  • Polyurethane finish
  • Paintbrushes
  • Respirator and safety goggles
  • Ear protection
Hardwood Floors Sanding Protect Hardwood Flooring

A Step-By-Step Guide to Refinishing Hardwood Floors

Step 1: Prep the Room

Remove all furniture from the room. Clean the floor thoroughly to remove any dust or debris that could interfere with sanding. Seal off doors and vents with plastic sheeting to prevent dust from spreading to other areas of the house.

Step 2: Sand the Floors

Begin sanding using a drum or orbital sander, starting with coarse-grit sandpaper to remove the existing finish and scratches. Be sure to sand along the grain of the wood and not against it to avoid causing damage. This process can be noisy and dusty, so wearing ear protection and a respirator is crucial. Hardwood Floor Sanding

Step 3: Fill the gaps

Inspect the floor for any gaps or holes. Use a wood filler that matches your floor to fill these in. Let it dry completely before proceeding to the next step.

Step 4: Sand Again

Now it’s time to sand again, this time with medium-grit sandpaper. This will smooth out the filler and any rough marks left by the coarse-grit sandpaper. Afterward, vacuum or sweep up the dust.

Step 5: Apply the stain (optional)

If you’re happy with the color of your wood, you can skip this step. If not, apply a wood stain of your choice using a rag or brush. Always test the stain in a small, inconspicuous area first to ensure you’re happy with the color. Allow the stain to dry as per the manufacturer’s instructions.

Step 6: Apply the Finish

Apply the first coat of polyurethane finish, starting at the farthest point from the door and working your way towards it. Allow the finish to dry for the recommended time. Oil-Based Polyurethane

Step 7: Lightly sand between coats

Using a fine-grit sandpaper, lightly sand the floor to ensure the next coat adheres properly. Wipe away the dust, then apply the second coat of finish. Repeat this process until you’ve applied the desired number of coats, usually two to three.

Step 8: Let it cure.

Let the final coat of finish cure as per the manufacturer’s recommendations before moving any furniture back into the room.

Conclusion: Transforming Your Hardwood Floors

Refinishing your hardwood floors can breathe new life into your space and add value to your home. While it requires some effort and patience, the stunning result is well worth it. So roll up your sleeves and give your hardwood floors the makeover they deserve!

Some Useful Links:

More from our Blog:

Underfloor Heating System: Revolutionizing Wood Flooring Heating Solutions Hardwood vs. Laminate: Insights into the Best Flooring Choice for Your Home A Handy Guide to Efficiently Manage Your Floor Sanding and Polishing Project Revitalize Your Home with Wood Floor Sanding: DIY Guide The Perils of DIY Floor Refinishing: Why It Might Not Be Your Best Choice  
Four cheerful customers holding up signs with the Mr. Sander logo and the text 'We give Mr. Sander 5 stars', showing their satisfaction with the service provided.
Floor Sanding Service

Sanding

We provide virtually dust-free sanding with our continuous belt machinery with mobile extraction units, giving you a safer environment for your family.

Floor Oiling Service

Oiling

This organic finish not only adds beauty to your home but also has exceptional water-repellent characteristics, making it easier to clean and maintain.

Floor Waxing Service

Waxing

This natural floor finish offers the softest and most mellow appearance – and leaves your floor able to breath.

Floor Buffing Service

Buffing

Using soft buffing machines (and hand-polishing where required) will bring a wonderful sheen to your newly-finished floor.

Wood Floor Repairs

Repairs

We offer a full assessment of your wooden floors to determine what repairs are needed to provide the perfect working surface for the later stages of sanding, staining and sealing. 

Floor Restoration Service

Restoration

We offer a comprehensive restoration process designed to address floors that are improperly fitted or damaged over time through wear and tear.

Request a fixed price quote for your wood floor restoration now

Simply enter your postcode below to get started.