What we did

We lifted both carpet and vinyl from the wood and disposed of them before beginning to sand. The dust free process was completed by buffing and vacuuming, to be completely sure there was no residue or debris left behind.

Gaps were cosmetically filled with our slivers and resin mix before we added one coat of light oak stain.

The work was completed with four coats of clear heavy duty lacquer.

The results

The floor was not too damaged so the repair was simple and effective. We successfully manoeuvred around small obstacles and the floor looks as though it has been recently fitted. The stain suits the hallway as the colour is similar to the banister and wood panels down the side of the stairs.

After we finished the job